MergenHub Envest
Home/Docs/Water Management module

Water Flow Diagram and balance

The water map of a site from source to discharge: place types, measured and computed flows, the water balance check, period and live views.

The Water Flow Diagram is the site's water map: places (source, distribution, point of use, treatment, outlet) and the flows between them. Line thickness is proportional to the amount; at every place inflow and outflow are compared. Page: Add-ons › Water Management › Water Flow Diagram (if it is not in the menu, turn on the feature group first).

Setup in three steps

  1. On the Counters and Metrics page give your water counters their category: Water production / supply, Water consumption, Wastewater / discharge (see Counters and period values).
  2. In the new diagram window (Set up flow diagram) click Draft from my counters. Production counters become sources, consumption counters points of use and discharge counters outlets; the unmetered part is added as a computed flow and the assumptions made are listed in the window.
  3. After saving, click a place or a flow on the diagram to change its name, type and counter; add places and flows or delete them. The whole diagram is available as a table in Settings.
Tip If you have a Water Efficiency profile the draft can also be made from it ("or from a Water Efficiency profile" in the same window). The setup wizard builds the diagram from the site's counters automatically.

Place types

Every place has a type. The five types are fixed; you name the place as you like. The type decides two things: which column the place is drawn in (left to right) and its flow rule.

TypeWhatRule
1. SourceWhere water enters the site: mains, well, rainwater.Has outflows only; no flow can end here.
2. Distribution / collectionReservoir, tank, collector, main line.Inflow and outflow are compared (balance).
3. Point of useProcess, cooling tower, boiler, housing, irrigation.If no outflow is defined, all incoming water is counted as consumed.
4. Treatment / recoveryWhere wastewater is treated or recovered.A flow returning from here to distribution is drawn as a green arc.
5. OutletDischarge, evaporation, water left in the product, loss.Has inflows only; no flow can start here.

If you are unsure, choose Point of use; the type can be changed later.

Flows and balance

ConceptDescription
Measured flowBound to a counter or a counter selector.
Computed flowDerived from the balance of a place (inflow − measured outflows): evaporation, loss, unmetered use. Drawn faint in the diagram.
BalanceAt a place whose flows are all measured, inflow and outflow are compared; if the difference exceeds the tolerance (5% by default) the place gets a red frame and a warning.

Reading the diagram

  • The tiles above the diagram summarise the period: water entering the site, recovered water, water consumed and leaving, and the difference between the two.
  • The How to read this diagram box explains the rectangle, the band, the faint band, the green arc and the red frame.
  • Click a place or a band to see what goes in and out and which counter each number comes from (or how it is computed).

Period and live view

The period size is hour, day, week, month or year; the arrows move between periods. The Live button refreshes the current period every 15 seconds and turns itself off when you go to an earlier period.

Note Manual counters are usually filled in monthly; in the hour, day and week views those flows stay empty. The diagram draws period totals (m³), not instantaneous flow (m³/h).

Outputs

The diagram downloads as Excel (flows and balance sheets) and CSV. The AI assistant and MCP clients read it with the get_water_flow tool ("which place does not balance").